So since my last post, it appears limited progress has been made to the table physically. Work has been done to cut out each of the goalmouths, as displayed below:
The goalmouths are 76 by 206 millimetres, with rounded top corners of radius 20mm (for all you currently used to imperial measurements, I frankly do not care =])
To cut the cavities, a simple electric jigsaw was used to cut the basic shape, with scoring (using a stanley knife) along the perimeter to reduce chipping of the wood.
Next was the process of measuring and boring the holes on either side of the table, to house the rods for the game. This is particularly important as accuracy is key. If measurements/cuts are off by the slightest, the game will be affected somewhat.
This is a picture of what the mechanism looks like currently:
Next I will need to work out the leg structure, of which I shall develop a computer model in the next few days. I will include that model in my next post. I will also be laminating the playing surface, and further investigating the idea of having lights built into the sides of the table.
If you have any more suggestions, I will be happy to listen to them, the feedback I received on the last post was wonderful, so thanks for that.
Cheers, Loads
